cree ml-e color series on linear board features a pplications > available in royal blue, blue, green, amber & red > vehicle > wide viewing angle: 125 > landscape > electrically neutral thermal path > consumer portable > high end portable > architectural flux characteristics (per led) color dwl (nm) kit used blue 465-485 0t01 green 520-535 o001 red 620-630 0v01 amber 585-595 o001 royal blue 450-465 o502 characteristics unit minimum typical maximum thermal resistance, junction to solder point- white, royal, blue c/w 11 thermal resistance, junction to solder point- green, red c/w 15 thermal resistance, junction to solder point- amber c/w 24 viewing angle (fwhm)- royal, blue, green, amber, red degrees 125 temperature coefficient of voltage- royal, blue mv/c -3.3 temperature coefficient of voltage- green mv/c -4 temperature coefficient of voltage- red mv/c -1.8 temperature coefficient of voltage- amber mv/c -1 esd classification (hbm per mil-std-883d) class 2 dc forward current- royal, blue, green, red ma 350 dc forward current- amber ma 250 reverse voltage v -5 forward voltage (@ 150 ma)- royal, blue v 3.2 forward voltage (@ 150 ma)- green v 3.45 forward voltage (@ 150 ma)- red v 2.2 forward voltage (@ 150 ma)- amber v 2.4 led junction temperature c 150 it is highly recommended for the user to review the cree series page for additional and most recent technical data at: http://www.cree.com/led-components-and-modules/products/xlamp/discrete-directional/xlamp-mle ml-e color series on linear board min.flux (lm) @350ma 10.7 30.6 the lighting class ?-watt xlamp ml-e led brings high performance and a smooth look to a wide range of lighting applications, including linear lighting, led replacement lamps, fluorescent retrofits and retail-display lighting. 18.1 30.6 175 (@150 ma) global headquarters, 3 northway lane north, latham, ny 12110, usa www.marktechopto.com toll free: 1-800-984-5337 ? phone: 518-956-2980 ? fax: 518-785-4725 ? email: info@marktechopto.com
hardware (not included) > mount with #4 machine screws. > 16awg maximum wire gauge. > use only with constant current power supplies. pcb fabrication > layer count: 1 > core material: 6061-t6 aluminum > single layer copper weight: 1oz > solder mask: white > finishing plating: pb free hasl the information contained herein is subject to change without notice. * exceeding maximum ratings may damage the led and cause potential safety hazards. * elevated operating temperatures can be expected to negatively impact the service life (lumen output) * all data is related to entire assembly. data reflects statistical mean values. actual data may differ depending on variances in the manufacturing process. * end users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. note 1: using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions a re within the absolute maximum ratings. note 2: the thermal resistance from the led junction to ambient temperature, rth(j-a), should be kept below 100c/w so that the led is not exposed to a condition beyond the absolute maximum ratings. note 3: the temperature of the led assembly must be measured at the tc-point according to en60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. ml-e color series on linear board global headquarters, 3 northway lane north, latham, ny 12110, usa www.marktechopto.com toll free: 1-800-984-5337 ? phone: 518-956-2980 ? fax: 518-785-4725 ? email: info@marktechopto.com
|
